| 주 저자 | Seul-Ki Han |
|---|
| 공동 저자 | Joon-Young Park, Eun-Ji Lee, Jae-Weon Jeong* |
|---|
| 소속 | Division of Architectural Engineering College of Engineering, Hanyang University, Division of Architectural Engineering College of Engineering, Hanyang University, The corresponding author* |
|---|
| Abstract | The multi-zone network model enables the easy and fast prediction of the airflow inside the
building, ventilation system performance, and concentration transport and dispersion,
compared to other simulation programs. However, the exact building parameters need to be
entered correctly in order to ensure that the simulation can replicate the phenomenon inside
the building in the most similar manner when the phenomenon inside the building is
predicted by using the simulation. However, the characteristics of parameters vary, depending
on the buildings. The simulation does not exactly match the conditions of real building
because the parameters are entered based on subjective judgment of the researchers when the
phenomenon inside the building is predicted based on simulation results. Thus, the calibration
for the parameter is required. The calibration process was established, and the validity of the
model generated by the established process was verified. In this study, the air-tightness was
measured for some elements of the building, as well as the building envelope of real building,
to evaluate the accuracy in order to verify the validity of calibration process. The results
showed a considerable inconsistency between the uncalibrated model and real experimental
results, and it was found that the calibrated model matched the real experimental results more
than the uncalibrated model. |
|---|
| Keyword | CONTAM, Air leakage, Multi-zone airflow network model, calibration |
|---|
| 페이지 | pp. 135~143 |
|---|
| 논문 파일 |
|
|---|
| 게재일시 |
-
|
|---|
| DOI | - |
|---|
| 학회/저널명 | ACCMES Osaka, Japan Vol.1, No.1 |
|---|
| 년도 | 2013 |
|---|
| 추가 문구 | - |
|---|
| 등록 일시 | 2025-06-18 16:46:09 |
|---|
